V3 Cannon Test Ramps at former Laatziger Ablage, Misdroy – Zalesie, Poland


Concrete remains of V3 Stellung Mitte Laatziger Ablage – Zalesie, Poland

The development of the German V3 weapon, was yet another Third Reich “Vengeance” project aiming to unleash it’s reign across the English Channel and target London from the European mainland. However in contrast to the V1 and V2 projects, this was not going to be a bigger, faster or more destructive ballistic missile, this was going to be a super-cannon.

The smoothbore gun would be able to shoot a large caliber finned shell over a great distance, by firing timed, multiple charges from secundary chambers during the projectile’s passing along the barrel, to add extra velocity. Calculations indicated that the gun would be able to shoot a distance of 160 km.

French ingenuity

In 1918 during the First World War the French Army made plans to build a long range multi-chambered cannon as an answer to the German “Paris Gun”. Luckily the war ended that same year and the plans disappeared into the army’s archives. But when Germany invaded France in 1940, the army archives fell into German hands and the plans were picked up by chief engineer August Coenders, designer of the bunker busting “Röchling Shell”, who used the plans to build a 20 mm prototype of the multi-chambered gun using excisting Flak 38 AA gun tubes.

With the help of his employer Hermann Röchling, Coenders succeeded in winning the support of Reichsminister Albert Speer for the project, allowing further development and testing of a first 150mm version of the cannon, starting from May 1943 at Heeresversuchsanstalt Hillersleben (Army proving ground) Germany. Speer in his turn informed Hitler about the gun, who gave his enthusiastic assent and ordered full priority for the development and deployment of this “Englandkanone”, even though it was still just a prototype and no results of test firings were available.

V3 Abschussrampe (Eng: launching ramp) at Laatziger Ablage – Zalesie, Poland Bundesarchiv_Bild_146-1981-147-30A,_Hochdruckpumpe_V-3

Construction of V3 bunker at Mimoyecques and Pumpwerk Misdroy

Although the Coenders design at Hillersleben soon exposed it’s flaws (there were problems with the premature explosion of the charges, the projectile’s design and a disappointing muzzle velocity), it was decided to go ahead with the selection and planning of a suitable site for the gun(s) to target England, leading to the construction of the underground V3 fortress at Mimoyecques, France in September 1943, while the test-facilities for the cannon were expanded to Laatziger Ablage, Misdroy, near the V1 and V2 testfacilities at Heeresversuchsanstalt Peenemünde.

At Laatziger Ablage the construction of three* “Abschussrampe” or test ramps, named Stellung Nord, -Mitte and -Süd, started the same year under the codename “Pumpwerk Misdroy” (eng: Pumping station Misdroy) with the gun ramps being codenamed “Hochdruckpumpe” (eng: High pressure pumps) or simply “HDP” in short. The reason for the selection of the testgrounds at Misdroy was that the cannon needed a certain angle to reach the calculated distance. The steep hillsides at Laatziger Ablage (then Germany, now named Zalesie in Poland) were an ideal setting for this to be achieved.

Aerial view of the V3 ramp location today – Zalesie, Wollin, Poland

*There are speculations that there might have been a fourth position or “Stellung”.

Heereswaffenamt takes over

By Januari 1944, the first 150 mm HDP cannons were operational and the next round of test firing started. But in March 1944, when it became clear that Coenders still did not manage to solve the design issues, HWA (Heereswaffenamt) took over the lead of the project. Other companies were brought in to shed their light over the problems in the HDP design and by May 1944 solutions had already been found for the premature initiation of secundary charges by adding a sealing piston before the shell and even a suitable projectile was found, the finned 150 mm Sprenggranate 4481 (97kg). An attempt was made to gain muzzle velocity by placing the chambers of the secundary charges along the barrel under an angle of 45°.

A technical drawing of a 50m (160ft) “short” version of the HDP signed 26 November 1944. This appears to be the only version that was actually used in combat. Artillerie Abteilung 705 – Lampaden, Germany

Again tests were done and at first the results seemed to be more promising. During a trail near the end of May 1944, ranges of up to 88 km were registered and in July the projectile even reached 93 km! Unfortunately during these tests, two sections of the gun barrel ruptured and further testing at Laatziger Ablage was cancelled.

Serious questions arose at HWA about further development, as it became clear that a lot of time and effort would be needed before the V3 weapon could effectively be used in the field. Eventually the project was given to SS Obergruppenführer Hans Kammler, who was also in charge of the V1 and V2 programs.

Concrete remains of V3 Stellung Mitte – Laatziger Ablage, Misdroy – Zalesie, Poland
V3 Stellung Mitte, looking downhill – Laatziger Ablage, Misdroy – Zalesie, Poland
A concrete baseplate of a steel stanchion – Laatziger Ablage, Misdroy – Zalesie Poland
View of V3 Stellung Mitte – Laatziger Ablage, Misdroy – Zalesie, Poland
V3 Stellung Nord, view down the ramp – Laatziger Ablage, Misdroy – Zalesie Poland
V3 Stellung Mitte – Laatziger Ablage, Misdroy – Zalesie Poland
V3 ramp concrete bases scattered on the hill – Laatziger Ablage, Zalesie Misdroy, Poland
Steel base construction of V3 ramp Stellung Nord – Laatziger Ablage, Misdroy – Zalesie, Poland
View uphill of V3 ramp Stellung Nord – Laatziger Ablage, Misdroy – Zalesie, Poland
A replica of a section of the multi-chambered V3 gun at Bunkier V3 Muzeum – Zalesie, Poland
V3 Hochdruckpumpe Shell – courtesy ww2aircraft
The museum has all kinds of fun stuff to do for everyone..
The V3 museum is based in the bunker of Laatziger Ablage – Zalesie, Poland

Visit Bunkier V3 Museum

This is not a standard museum, but reminds us of the home of a hardcore WW2 collector (right after his wife left him). The people here are really friendly, there is a nice atmosphere and inside the bunker there is lots of stuff that is worth a look. Don’t expect everything on display to be connected to the history of Laatziger Ablage though, because we highly doubt that. When you just got back from the climb up the hill to see the V3 Ramps, you can buy a refreshment at the kantyna and hang out in front of the bunker. Bring mosquito repellent in the summer though, especially when you take the walk up into the forest.

For more information about the museum visit: www.bunkierv3.pl



Our newest WW2 articles in your inbox every month? Join other subscribers and sign up here!



Share your thoughts on this article